TPK-32 Super tire sealant (250ml)

USAGE

1. Raising the tire first then pulled out the nail. (do mark)

2. Place valve at 5-7 o’clock position and remove valve cap and core.

3. Pour sealant into tire from tire valve.

4. Turn tight tire valve core and fully atmosphere pressure about 30 psi/lb.

5.When beginning to inflate, will leak out from leak hole.

   Please use the finger to press on the broken hole about 10 seconds and then go on the road immediately.,

   if the tire punctured again also can mend instantly. (the car goes as usual)

6.If car owner would like to mend tires, after reaching destination and looking for repair factory then unload the tire and

   flush with water then wipe to dry the tire can mend tire again. (Recommended usage amount)